This term refers to a specific Rock-type move in the Pokmon video game series. It is a damaging attack that can strike both opposing Pokmon in a double battle. As an example, a Pokmon using this attack might target both opponents on the opposing team, potentially weakening or defeating them simultaneously.
This ability is significant due to its potential for multiple target damage. This makes it a valuable asset in double battles and other formats where multiple Pokmon are on the field. Historically, its usefulness has fluctuated based on the prevalence of these battle formats and the availability of Pokmon that can effectively utilize it. Furthermore, the power and accuracy of this move have been adjusted across different generations of the game, influencing its competitive viability.
Understanding the mechanics, strategic applications, and historical evolution of this area allows for a deeper appreciation of the game’s combat system and strategic depth. The following discussion will explore its damage calculation, accuracy, distribution among Pokmon, and its strategic uses in various competitive environments.
Strategic Application of Rock-Type, Multi-Targeting Attacks
The following outlines key strategies for effectively leveraging Rock-type, multi-targeting attacks in Pokmon battles.
Tip 1: Target Selection is Paramount: Prioritize targets based on type matchups and predicted moves. If one opponent is weak to Rock-type attacks and the other is likely to use a setup move, targeting both can provide immediate advantage and disrupt the opponent’s strategy.
Tip 2: Utilize Held Items for Damage Enhancement: Equip the Pokmon using this attack with items such as Life Orb or Choice Band to increase its damage output. A damage boost can ensure key knockouts, altering the course of a battle.
Tip 3: Team Composition Synergies are Essential: Build a team around the strengths of the Pokmon wielding this attack. Support Pokmon can provide speed control through moves like Tailwind or Sticky Web, ensuring the attack hits before the opponents can react.
Tip 4: Beware of Wide Guard: Opponents may attempt to negate the attack with Wide Guard. Anticipate this by scouting for potential Wide Guard users and adjusting strategy accordingly. Consider using single-target attacks on turns where Wide Guard is likely.
Tip 5: Protect Against Status Conditions: Paralysis, burn, and other status conditions can severely hinder the effectiveness. Ensure the user is protected from these effects through abilities, held items (Lum Berry), or teammate support.
Tip 6: Recognize Threat Matchups: Understand which Pokmon resist Rock-type attacks and pose a direct threat. Switching out to a more favorable matchup can prevent a potentially disadvantageous situation.
Mastering target selection, item usage, team composition, anticipation of defensive measures, and awareness of vulnerabilities will maximize the effectiveness of Rock-type, multi-target moves.
The subsequent sections will delve into specific Pokmon that excel in utilizing this attack and how to optimize their builds for competitive success.
1. Type
The Rock typing in the Pokmon franchise dictates fundamental aspects of combat interaction, directly influencing the effectiveness and strategic application of “pokemon rock slide”. Understanding this type’s characteristics is crucial for utilizing the move to its full potential.
- Damage Multipliers
The Rock type is super effective against Fire, Ice, Flying, and Bug-type Pokmon, dealing double damage. Conversely, it is not very effective against Fighting, Ground, and Steel-type Pokmon, dealing half damage. This interaction matrix determines when employing “pokemon rock slide” is strategically advantageous versus other attack options. For instance, using the move against a Charizard (Fire/Flying) yields significant damage, while employing it against a Steelix (Steel/Ground) is less efficient.
- Type Resistances and Weaknesses
Rock-type Pokmon resist Normal, Fire, Flying, and Poison-type attacks, taking half damage from them. However, they are weak to Fighting, Ground, Steel, Water, and Grass-type attacks, taking double damage. This defensive profile shapes the viability of Pokmon utilizing “pokemon rock slide.” For example, a Tyranitar utilizing this attack benefits from its resistance to Normal and Flying moves but is vulnerable to common Fighting and Ground-type attacks.
- Movepool Synergies
Rock-type Pokmon often have access to a diverse movepool including Ground, Dark, and other coverage moves. This allows for strategic type coverage to address weaknesses and exploit opponent vulnerabilities. “pokemon rock slide” may be combined with moves like Earthquake (Ground) or Crunch (Dark) to provide a more comprehensive offensive toolkit, minimizing the impact of type resistances.
- Status Effects and Abilities
The Rock type does not inherently grant specific immunity or resistance to status conditions like paralysis or burn. However, certain Rock-type Pokmon possess abilities that mitigate these effects. For example, the ability “Sand Stream” summons a Sandstorm that can damage non-Rock, Steel, and Ground-type Pokmon, providing additional utility alongside the move. This interaction between ability and typing influences the overall effectiveness of the strategy.
In conclusion, the Rock typing is an integral component of “pokemon rock slide’s” strategic value. Damage multipliers, resistances, movepool synergies, and status effect considerations all contribute to the move’s efficacy in various battle scenarios. Understanding these facets allows players to make informed decisions regarding when and how to deploy this attack for optimal results.
2. Damage
The “Damage: Physical” classification of the Rock-type move influences its functionality and effectiveness within the battle system. The determination of whether an attack is physical or special is crucial for damage calculation, as it interacts with specific stats on both the attacking and defending Pokmon.
- Defense Stat Interaction
Physical attacks, like this one, calculate damage using the attacker’s Attack stat and the defender’s Defense stat. A Pokmon with high Defense will mitigate more damage from the move compared to a Pokmon with low Defense. For instance, a Steelix will take significantly less damage than a Chansey, despite both potentially being weak to Rock-type attacks. This difference in stat interaction necessitates careful team building and target selection.
- Attack Stat Investment
The usefulness of physical attacks is directly linked to a Pokmon’s Attack stat. Investing Effort Values (EVs) and Individual Values (IVs) into the Attack stat will increase the damage output of the move. Pokmon such as Tyranitar, with naturally high Attack stats, are generally better suited to utilize the attack effectively, compared to those with low Attack. Optimizing a Pokmon’s Attack stat is critical for maximizing the move’s potential.
- Ability Synergies
Various abilities can enhance the damage output of physical attacks. For example, the ability “Huge Power” doubles the Attack stat of the Pokmon, significantly increasing the move’s damage. Conversely, abilities like “Intimidate” can lower the Attack stat of the opposing Pokmon, reducing the damage inflicted. The interaction between abilities and the physical nature of the attack significantly influences its strategic applications.
- Item Enhancements
Held items can further amplify the damage of physical attacks. Items such as Choice Band, which boosts Attack at the cost of locking the user into one move, or Life Orb, which increases damage output at the cost of HP, can substantially increase the move’s power. The choice of held item must be strategically aligned with the Pokmon’s role and team strategy.
In summary, the “Damage: Physical” characteristic of “pokemon rock slide” is deeply interwoven with the statistical landscape of the battle system. It determines which stats are relevant, how abilities interact with the move, and which items provide the most substantial benefit. Therefore, a comprehensive understanding of this aspect is paramount for effectively utilizing the move in competitive scenarios.
3. Targets
The “Targets: Multiple” characteristic of the move indicates its capability to strike more than one opponent simultaneously during a battle. This attribute is intrinsically linked to its strategic value, particularly within double and triple battle formats where multiple Pokmon are active on the field. The ability to inflict damage across several targets introduces a layer of tactical complexity, demanding careful consideration of target selection and potential repercussions. Failure to account for the position, typing, and predicted actions of each opponent can diminish the move’s efficiency, potentially rendering it less impactful than a single-target alternative. An example of this is targeting two opponents, one of which resists Rock-type attacks and the other that is about to use Protect, resulting in minimal damage output.
The strategic application of this move in a multi-target environment often involves exploiting type weaknesses or disrupting coordinated strategies. A player might prioritize targeting a Pokmon with a critical type weakness alongside a support Pokmon providing speed control or stat boosts. Successfully eliminating or weakening both targets in a single turn can create a significant advantage. Furthermore, the move’s capacity to induce flinching can disrupt opponent strategies by preventing afflicted targets from executing their intended moves. However, opponents may employ countermeasures, such as Wide Guard, a move that protects all allied Pokmon from multi-target attacks. Anticipating and navigating such defenses is paramount for maximizing the move’s strategic utility.
In conclusion, the “Targets: Multiple” functionality is a defining attribute that influences its tactical deployment in Pokmon battles. Effectively leveraging this characteristic requires astute assessment of the battle landscape, consideration of opponent strategies, and adaptation to potential defensive measures. Understanding the nuanced interplay between targeting mechanics and strategic decision-making is critical for harnessing the full potential of this move and achieving a competitive edge. The significance of this understanding extends beyond mere execution; it encompasses the broader strategic thinking essential for mastery of the game.
4. Accuracy
The “Accuracy: Ninety” attribute significantly influences the reliability and strategic viability of “pokemon rock slide.” This percentage represents the probability of the move successfully hitting its intended target, barring any modifying factors such as evasion boosts or accuracy reductions. An accuracy of ninety, while seemingly high, introduces a non-negligible risk of failure, impacting decision-making during competitive battles. For example, a player relying on the move to secure a crucial knockout may find the move missing, potentially turning the tide of the battle. The consequences of this unreliability are amplified in high-stakes scenarios where a single missed attack can lead to defeat.
The importance of this accuracy rating becomes more apparent when compared to moves with higher or lower accuracy. Moves with perfect accuracy, such as Swift, guarantee a hit, albeit often with lower power. Conversely, moves with lower accuracy, such as Stone Edge, offer higher damage potential but carry a greater risk of missing. The accuracy rating represents a trade-off between power and reliability. A player must weigh these factors when selecting moves for their Pokmon. In practical terms, the accuracy of 90% means that, statistically, the move will miss approximately one in ten times. Over the course of a long battle, or a series of battles, this can become a decisive factor. Held items, such as Wide Lens, may be used to mitigate the risk of missing, increasing the accuracy to over 90%.
In conclusion, the “Accuracy: Ninety” associated with this Rock-type move represents a balance between power and reliability, influencing strategic decisions in competitive battles. While the probability of success is high, the inherent risk of failure must be considered when evaluating its utility. Understanding this balance enables players to make informed choices, maximizing their chances of success. The key challenge lies in predicting situations where the risk of missing is outweighed by the potential reward, and in preparing contingency plans to mitigate the impact of a missed attack.
5. Power
The base power of seventy-five associated with the attack directly determines its damage output, serving as a primary factor in assessing its combat efficacy.
- Damage Calculation and Statistical Significance
The numerical value of seventy-five is a direct input in the damage formula within the game. All other variables being equal, a higher base power will result in greater damage inflicted upon the opponent. The choice to assign the move this particular power level implies a deliberate balance between potential impact and other attributes, such as accuracy and secondary effects.
- Comparative Analysis with Other Rock-Type Moves
Several Rock-type moves exist within the game, each possessing a different base power. For instance, Stone Edge has a higher base power but lower accuracy, while Rock Throw possesses a lower base power but greater accuracy. The base power of seventy-five places it in a middle ground, making it a reliable option when a balance of power and accuracy is desired.
- Strategic Implications in Double Battles
The multi-target nature of the attack necessitates a careful assessment of its power. In double battles, the damage is spread across multiple opponents, making a higher base power advantageous. However, a lower power might be acceptable if the move is used primarily for its secondary effect, such as flinching.
- Influence of Type Effectiveness and Abilities
The actual damage inflicted by the attack is further modulated by type effectiveness and the abilities of both the attacker and defender. A base power of seventy-five may be amplified significantly when used against a Pokmon weak to Rock-type attacks, or attenuated when used against a Pokmon resistant to Rock-type attacks. Similarly, abilities such as “Technician” (which boosts moves with base power less than or equal to 60) do not impact this specific move, influencing its viability in certain team compositions.
In conclusion, the base power of seventy-five is a key determinant in the strategic assessment of the attack, influencing its use based on its damage output and the specifics of the battle environment. The interaction with other attributes, such as accuracy, as well as external factors like type effectiveness, and abilities, further contextualize its efficacy.
6. Distribution
The characteristic of “Distribution: Widespread” pertaining to this Rock-type attack indicates its availability across a broad spectrum of Pokmon within the game’s ecosystem. This extensive accessibility significantly impacts its strategic value and prevalence in competitive play. A move with limited distribution would restrict its use to a select few Pokmon, thereby narrowing its strategic applications and potentially limiting its impact on the meta-game. Conversely, the move’s widespread distribution ensures that numerous Pokmon can leverage its properties, leading to diverse team compositions and strategic approaches. This broad availability creates a ripple effect, influencing team building, move selection, and overall battle strategies employed by players. For instance, the abundance of Pokmon capable of learning this move means opponents must consistently account for its potential presence, adapting their strategies accordingly.
The widespread nature of the move also affects its role in various battle formats. In single battles, the diversity of Pokmon capable of utilizing it can provide players with numerous options for type coverage and team synergy. In double battles, its multi-target capability, combined with widespread distribution, makes it a valuable asset for applying pressure across the opponent’s team. Furthermore, the ease of access facilitates its use in early-game scenarios, allowing players to develop strategies around it from the outset of their gameplay experience. Specific examples include the move’s widespread distribution among Rock-type Pokmon, which are commonly found early in the game, and its accessibility via TMs (Technical Machines), further expanding its reach to Pokmon that may not naturally learn Rock-type attacks.
In conclusion, the “Distribution: Widespread” element is a fundamental aspect shaping the impact and utility of this specific move. Its extensive availability allows a wide range of Pokmon to benefit from its attributes, leading to varied strategic applications. Understanding this aspect is crucial for comprehending the move’s role in both casual and competitive settings. The challenge for players lies in identifying the optimal Pokmon to wield this attack effectively, and adapting their strategies to account for its ubiquitous presence in the game.
7. Effect
The “Effect: Flinch” attribute of the Rock-type move directly contributes to its strategic utility by introducing an element of disruption into the opponent’s planned actions. This effect carries a ten percent chance of causing the target Pokmon to flinch, preventing it from executing its move during that turn. The probability, while not guaranteed, provides a tactical advantage that can alter the course of a battle. Consider a scenario where an opponent is poised to use a powerful attack; inducing flinching effectively nullifies their offensive maneuver, providing an opportunity to gain momentum or apply further pressure. The importance of this flinching effect lies in its ability to disrupt set-up strategies, interrupt predictable patterns, and create openings for offensive maneuvers. The success of such scenarios is not guaranteed, due to a low flinch chance.
However, the value of “Effect: Flinch” is situational and influenced by factors such as the opponent’s speed and the presence of abilities that prevent flinching. For instance, if the opposing Pokmon is significantly faster, it may still have an opportunity to act before the turn the move is executed. Likewise, abilities like Inner Focus or Shield Dust negate the flinching effect, rendering this aspect of the move inconsequential. Therefore, effective utilization necessitates a comprehensive understanding of the battle dynamics and potential counter-strategies. Careful consideration must be given to the opponent’s team composition, abilities, and predicted actions. In some cases, the flinching effect can be the decisive factor in a victory or a loss. Predicting an opponents action and successfully landing flinch helps win the battle.
In summary, the flinching effect is a notable aspect of this Rock-type attack, adding a layer of tactical depth to its strategic application. While the probability of inducing flinching is limited, its potential to disrupt opponent strategies makes it a valuable consideration in team building and move selection. The challenge lies in recognizing scenarios where the flinching effect can yield a significant advantage and adapting battle plans to account for potential counter-strategies. Careful evaluation of risk versus reward is crucial for successful integration of this move into competitive play. And knowing opponents team, ability, and predict action during battles is important.
Frequently Asked Questions about “pokemon rock slide”
The following questions and answers address common inquiries regarding a specific Rock-type move in the Pokmon video game series, aimed at clarifying its mechanics and strategic applications.
Question 1: What factors determine the damage output of “pokemon rock slide”?
The damage is determined by the attacker’s Attack stat, the defender’s Defense stat, the move’s base power of 75, type effectiveness, and any relevant abilities or items affecting damage calculation. Critical hits can further amplify damage. Random number between 1 and 100 will affect it too.
Question 2: How does the “Targets: Multiple” characteristic function in double battles?
In double battles, it strikes both opposing Pokmon simultaneously, dealing damage to each target. The damage calculation is performed independently for each target. Move will hit 2 targets at the same time.
Question 3: What are the best strategies to mitigate the risk associated with the move’s 90% accuracy?
Strategies include using items that boost accuracy, such as Wide Lens, or employing moves that increase the user’s accuracy stat. Alternatively, team compositions can prioritize speed control to ensure the user moves first, reducing the likelihood of being KO’d before the attack is executed. It will miss 10% if nothing goes wrong.
Question 4: Which abilities negate or reduce the effectiveness of the “Effect: Flinch” attribute?
Abilities such as Inner Focus and Shield Dust prevent the Pokmon from flinching, rendering the flinch effect useless. Additionally, a held item like the Mental Herb can cure the flinch status if it occurs. Pokemon are immune of flinch while ability is active.
Question 5: What advantages does widespread distribution offer in competitive battling?
Widespread distribution allows diverse Pokmon to utilize the move, broadening strategic options and making it more challenging for opponents to predict team compositions and move sets. It promotes a more versatile and adaptable meta-game. Many pokemon can learn from tm or learn it.
Question 6: How has the move’s viability shifted across different generations of the Pokmon game series?
The move’s viability has been influenced by changes in the battle system, the introduction of new abilities and items, and shifts in the overall meta-game. Adjustments to power, accuracy, or secondary effects in different generations have also impacted its strategic value. The Pokemon Company changes it in every generations so its viability depend on what gen.
These FAQs provide a foundational understanding of the move, emphasizing its inherent mechanics, strategic considerations, and contextual relevance within the Pokmon universe.
The subsequent section will delve into advanced strategies for mastering the intricacies of its use.
Conclusion
This analysis has comprehensively examined the multifaceted characteristics of the Rock-type move, focusing on its strategic application and underlying mechanics. Key aspects, including damage calculation, target selection, accuracy considerations, and the significance of its widespread distribution, were thoroughly explored. The interplay between these attributes shapes its utility within diverse battle scenarios, influencing team compositions and strategic approaches.
Mastery requires a deep understanding of its properties and the capacity to adapt strategies in response to evolving metagame trends. Ongoing assessment and refinement of tactical deployment will remain crucial for capitalizing on its potential and maximizing competitive advantage. Future endeavors should involve an in-depth examination of specific team archetypes and optimal move combinations to improve its efficiency.
